BHNLW - SCAT-400 INDUSTRIAL STRIPPER

Product Identification

Product ID:SCAT-400 INDUSTRIAL STRIPPER
MSDS Date:12/01/1985
FSC:8010
NIIN:00N009993
MSDS Number: BHNLW

Responsible Party
STATE CHEMICAL MANUFACTURING CO.
3100 HAMILTON AVENUE
CLEVELAND, OH 44114

Emergency Phone: 216-861-7114

Info Phone: 216-861-7114

Cage: 53798

Contractor
STATE CHEMICAL MANUFACTURING CO.
CLEVELAND, OH 44114-3701 US

Telephone: 216-861-7114

Cage: 53798

Ingredients

METHYLENE CHLORIDE (SARA III)

CAS: 75-09-2

RTECS: PA8050000

Fraction By Weight: >60%

OSHA PEL 500 PPM/C,1000; Z2

ACGIH TLV: 50 PPM, A2; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: <10%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


METHYL ALCOHOL (METHANOL) (SARA III)

CAS: 67-56-1

RTECS: PC1400000

Fraction By Weight: <20%

OSHA PEL S,200PPM/250STEL

ACGIH TLV: S,200PPM/250STEL; 93

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


HYDROXYACETIC ACID

CAS: 79-14-1

RTECS: MC5250000

Fraction By Weight: <10%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:N/K
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:DANGER.POISON.MAY BE FATAL OR CAUSE
BLINDNESS IF SWALLOWED.OVEREXPOSURE DUE TO INHALATION OR SKIN
ABSORPTION MAY RESULT IN SYSTEMIC METHANOL POISONING.CHRONIC
EXPOSURE CAN RESULT IN KIDNEY AND/OR LIVE R DAMAGE.
Explanation of Carcinogenicity:METHYLENE CHLORIDE:INAD EVID FOR CARCIN
IN HUM,SUFF EVID FOR CARCIN IN ANIM (IARC 1987).ACGIH:A2 SUSP HUM
CARCIN (1989).
Effects of Overexposure:EYES:AVOID CONTACT WITH EYES.SKIN:MAY CAUSE
SKIN IRRITATION.INGEST:MAY BE FATAL OR CAUSE BLINDNESS IF
SWALLOWED.CANNOT BE MADE NON-POISONOUS.INHAL:VAPOR HARMFUL.AVOID
PRLNG/RPTD BRTHG OF VAPOR.INHAL C AN RESULT IN ELEVATED BLOOD
CARBOXYHEMOGLOBIN LEVELS,HEADACHE,DIZZINESS,AND NAUSEA.
Medical Cond Aggravated by Exposure:N/K

First Aid

First Aid:EYES:FLUSH EYES W/ PLENTY OF COOL H*2O FOR AT LEAST 15
MIN.CALL MD IMMED.DO NOT WEAR CONTACT LENSES WHILE WORKING W/ THIS
PROD.SKIN:IMMED FLUSH W/ PLENTY OF H*2O FOR 15 MIN.IF IRRIT
PERSISTS,CALL MD.I NGEST:INDUCE VOMIT.GIVE 1/2 OUNCE OF IPECAC
SYRUP,USP PLUS AT LEAST 1 CUP H*2O.REPEAT ONLY ONCE IF NO VOMIT IN
20 MIN.CALL MD IMMED.INHAL:REMOVE TO FRESH AIR.GIVE ARTF RESP IF
NEEDED.CALL MD IMMED.

Fire Fighting

Flash Point Method:TOC
Flash Point:106F,41.1C
Lower Limits:N/K
Upper Limits:N/K
Extinguishing Media:CARBON DIOXIDE,DRY CHEMICAL OR FOAM.
Fire Fighting Procedures:WEAR PRESSURE DEMAND SCBA AND FULL PROTECTIVE
EQUIP .ADDITION OF WATER TO A BURNING FIRE MAY REDUCE THE INTENSITY
OF THE FLAME.
Unusual Fire/Explosion Hazard:CAUTION.COMBUSTIBLE.VAPS ARE HEAVIER THAN
AIR & MAY TRAVEL ALONG THE GROUND AND BE IGNITED BY IGNITION
SOURCES.HAZ DECOMP PRODS MAY INCLUDE CARBON (SEE SUPP)

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNIT.VENT AREA OF SPILL
THOROUGHLY.ABSORB SPILL ON STATE OIL ABSORBENT,SAND,OR
VERMICULITE.FLUSH RESIDUE WITH PLENTY OF WATER.
Neutralizing Agent:N/K

Handling

Handling and Storage Precautions:DANGER.POISON.MAY BE FATAL OR CAUSE
BLINDNESS IF SWALLOWED.COMBUSTIBLE.VAPOR HARMFUL.AVOID CONTACT W/
SKIN & EYES.DO NOT STORE IN OPEN (SEE SUPP DATA)
Other Precautions:NO SMOKING IN AREA OF USE.DO NOT USE IN THE GENERAL
VICINITY OF ARC WELDING,OPEN FLAMES OR HOT SURFACES.HEAT AND/OR UV
RADIATION MAY CAUSE THE FORMATION OF CHLORIDES,FLUORIDES OR
PHOSGENE .DO NO T REUSE EMPTY DRUMS.DRUMS (SEE SUPP DA)

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW TLV .
Protective Gloves:REQUIRED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:CLEAR WATER SOURCE IN WORK AREA IN CASE OF
ACCIDENTAL EYE CONTACT.
Work Hygienic Practices:N/K
Supplemental Safety and Health
EXPLO HAZ:MONOXIDE,HYDROGEN CHLORIDE,PHOSGENE OR FORMALDEHYDE
GASES.HNDLG/STOR PROC:OR UNLABELED CNTRS.KEEP CNTRS TIGHTLY
CLOSED.DO NOT USE ON HOT SURFACES.OTHER PREC:SHOULD NOT BE
SUBJECTED TO AIR PR ESS,CUTTING TORCHES,OR TOOLS.READ AND FOLLOW
ALL LABEL PRECS.FOR INDUSTRIAL USE ONLY.KEEP OUT OF REACH OF
CHILDREN.

Chemical Properties

Boiling Pt:B.P. Text:100-110F
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:N/K
Spec Gravity:1.155 (WATER=1)
Evaporation Rate & Reference:N/K
Solubility in Water:MODERATE
Appearance and Odor:AN OPAQUE GREEN VISCOUS LIQUID WITH A CHLORINATED
ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS,STRONG CAUSTICS AND CHEMICALLY ACTIVE LIGHT METALS.MAY
EFFECT SOME PLASTICS ADVERSELY.
Stability Condition to Avoid:AVOID HEAT,SPARKS AND OPEN FLAME.
Hazardous Decomposition Products:CARBON MONOXIDE,HYDROGEN
CHLORIDE,PHOSGENE OR FORMALDEHYDE GASES.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .DO NOT REUSE EMPTY CNTRS.FLUSH
THOROUGHLY W/ WATER,CRUSH & DISCARD OR GIVE RINSED DRUM TO A DRUM
RECONDITIONER FOR RECYCL ING.SCAT-400 IS HAZARDOUS WASTE AS DEFINED
BY EPA.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.